Response to Enquiries and Questionnaires Regarding Non-Conflict Raw Materials:Non-Conflict Materials/Minerals Statement

REACH Regulations in relation to aluminium and aluminium alloy semi-finished products

REACH Regulations in relation to stainless steel semi-finished products

Response to Enquiries and Questionnaires Regarding REACH for semi-finished products in metals and alloys

Information about specifying and inspection authorities

An explanation of Test Certificates and their contents for metals & alloys, such as stainless steel and aluminium in semi-finished forms

Aluminium alloy 1050 / 1050A Sheet in the soft 'O' condition for general purpose use

Aluminium alloy 1050 / 1050A H14 Sheet for general purpose use

Aluminium alloy 2011 T3 Extruded and Drawn Machining Bar is a high mechanical strength alloy that machines exceptionally well

Aluminium alloy 2011 T6 Machining Bar is a high mechanical strength alloy that machines exceptionally well

Aluminium alloy 2014 T651 is a high mechanical strength alloy

Aluminium alloy 2014 T6511 is a high mechanical strength alloy

Aluminium alloy 4925 H12

Aalco Triple-Grip Aluminium Tread-plate in alloy 5052 H32

Marine Grade Aluminium alloy 5083 0 / H111 - For excellent seawater corrosion resistance

Marine Grade Aluminium alloy 5083 H32 - For excellent seawater corrosion resistance

G.AL C250 Precision Milled Plate, Alloy 5083

Aluminium alloy 5251 0 in the soft condition for good ductility and formability

Aluminium alloy 5251 H22 for good ductility and therefore good formability.

Aluminium alloy 5251 H24 for good ductility and therefore good formability

Aluminium alloy 5454 0 / H111

Aluminium alloy 5454 H22 / H32

Aluminium alloy 5754 Treadplate for excellent corrosion resistance

V-CAST AlMg3 (EN AW-5754) is a non-ageing wrought alloy with following chemical composition (weight-%, according to EN 573-3). Typical applications are decoratively anodized parts.

V-CAST AlMg3 (EN AW-5754) is a non-ageing wrought alloy with following chemical composition (weight-%, according to EN 573-3). Typical applications are decoratively anodized parts.

Aluminium alloy 6061 T6 for good corrosion resistance and weldability

Aluminium Alloy 6063 0 for good surface finish and anodising in the soft condition

Aluminium Alloy 6063 T4 for good surface finish and anodising

Aluminium Alloy 6063 T6 Rod/Bar for good surface finish and anodising

Aluminium Alloy 6063A T4 for good surface finish and anodising

Aluminium Alloy 6063A T6 for good surface finish and anodising

Aluminium alloy 6082 0 - The highest strength 6000 series alloy in the soft condition

Aluminium alloy 6082 T4 - The highest strength 6000 series alloy

Aluminium alloy 6082 T6 - The highest strength 6000 series alloy

Aluminium alloy 6082 T6 T651- The highest strength 6000 series alloy

Aluminium alloy 6082 T6 T651- The highest strength 6000 series alloy

6101 T6 is an extrusion alloy. 6101A and 6101B variants are available: PLEASE REFER TO THE TWO DATASHEETS FOR THESE

Aluminium Alloy 6101A Extruded Round, Flat, Hexagon & Square Bar and Tube

Aluminium Alloy 6101B Extruded Round, Flat, Hexagon & Square Bar and Tube

Aluminium alloy 6262 T6 Bar - Very good corrosion resistance and high strength.

7075 Bar is a high strength aluminium alloy offering good corrosion resistance that is often used in aerospace applications

Technical data and stock range information for Aalcopanel Aluminium Composite Panels (ACP)

ALUMEC 89 high strength hot rolled aluminium tooling plate.

A guide to cleaning aluminium products

A guide to the EN Standards for aluminium extrusions

A guide to the EN Standards for rolled aluminium (plate and sheet)

A guide to the fabrication of aluminium and aluminium alloys

An introductory guide to aluminium and aluminium alloys

A guide on material safety covering aluminium and aluminium alloys

MIC6 Cast Aluminium Tooling Plate

PLANCAST PLUS Alloy 5754 Plate

ROHS information on aluminium and aluminium alloys

A guide to the specifications for aluminium and aluminium alloys

A guide to the temper designations for aluminium and aluminium alloys

Tri-Plate Aluminium/Steel Marine Grade Transition Joint with Lloyds Approval

A guide to the anti-bacterial and anti-microbial properties & uses of Copper / Copper Alloys

CW004A (C101) Pure Copper

CW024A (C106) Pure Copper

CW307G Aluminium Bronze

CW451K / PB102 Leaded Phosphor Bronze

CW505L / CZ106 Brass

CW508L / CZ108 cold forming brass

CW508L / CZ108 cold forming brass

CW606N / CZ 131 Brass for machining, fasteners and rivets

CW614N / CZ 121 Free-Machining Brass

CW614N / CZ 121 Free-Machining Brass

CW624N / CZ130 Brass for decorative applications

CW712R / CZ112 Naval Brass

CW721R / CZ114 High Tensile Brass / Manganese Bronze

Def-Stan 02-833 ~ NES833 ~ CW307G Aluminium Bronze

A guide to the EN standards covering copper and copper alloys (brass and bronze)

A guide to the fabrication and machining of copper and copper alloys (brass and bronze)

An intorductory guide to copper and its alloys, brass and bronze

A guide on material safety covering copper and copper alloys, (brass, bronze, copper-nickel)

Grade 410S / 1.4000 ferritic stainless steel is a lower carbon version of grade 410.

Grade 410S / 1.4000 ferritic stainless steel is a lower carbon version of grade 410.

Grade 1.4003 / Nirosta 4003 / 3CR12 Utility Stainless Steel Sheet and Plate

1.4005 / 416 Martensitic Stainless Steel

Grade 410 / 1.4006 is a hardenable martensitic stainless steel available in bar form only.

Type 1.4016 / 430 Ferritic 17% Chromium Stainless Steel

Type 1.4016 / 430 Ferritic 17% Chromium Stainless Steel

1.4021 / 420 Free Machining Martensitic Stainless Steel

1.4125 / 440C Martensitic Stainless Steel

Type 1.4301 / 304 (18/8) Chromium/Nickel Austenitic Stainless Steel

Type 1.4301 / 304 (18/8) Chromium/Nickel Austenitic Stainless Steel in Sheet and Plate form (Quarto Plate & CPP)

Type 1.4305 / 303 (18/8) Chromium/Nickel Austenitic Stainless Steel Free-Machining Bar

Type 1.4307 / 304L (18/8) Low Carbon Chromium/Nickel Austenitic Stainless Steel

Type 1.4307 / 304L (18/8) Low Carbon Chromium/Nickel Austenitic Stainless Steel in Sheet and Plate form (Quarto Plate & CPP)

Type 1.4404 / 316L (18/10/Moly) Low Carbon Chromium/Nickel/Molybdenum Austenitic Austenitic Stainless Steel

Type 1.4404 / 316L (18/10/Moly) Low Carbon Chromium/Nickel/Molybdenum Austenitic Stainless Steel in Sheet and Plate form (Quarto Plate & CPP)

Grade 1.4462 / ASTM A815 ~ S31803 / 2205 Duplex Stainless Steel

Grade 1.4462 / ASTM A815 ~ S31803 / 2205 Duplex Stainless Steel

Type 1.4509 / 441 Stainless Steel

Type 1.4510 / 439 Stainless Steel

Grade 409 / 1.4512 is a titanium stabilised ferritic stainless steel.

Type 1.4571 / 316Ti (18/10/Moly/Ti) Chromium/ Nickel/ Molybdenum/Titanium Austenitic Austenitic Stainless Steel

Type 1.4919 / 316H Stainless Steel

Type 1.4948 / 304H Stainless Steel

AMS 5659 Precipitation Hardening Stainless Steel 15/5 PH

The 200 series of low nickel austenitic stainless steels - 201, 201L 202, 204

A guide to the alloying elements in stainless steel and their effect on the properties of the alloy

AMS5643 AMS5604 AMS5622 1.4542

A guide to ANSI / ASME B36.19 Stainless Steel Pipe in Nominal Bore Sizes with Schedule Wall Thicknesses

Grade 1.4462 / ASTM A815 ~ S31803 / 2205 / 318 Duplex Stainless Steel

A guide to the EN Standard for stainless steel rolled edge flat bar

A guide to the EN Standards for Stainless Steel Bar

A guide to the EN Standards for Stainless Steel Cold Rolled Sheet

A guide to the EN Standards for Stainless Steel Hot Rolled Plate

Innosoft and Innoprotect Stainless Steel Surface Treaments for cleaning and protection

Innosoft and Innoprotect Stainless Steel Surface Treaments for cleaning and protection

A guide to ISO 286 Tolerances for Stainless Steel Bar

Grade 1.4162 / LDX 2101 Lean Duplex Stainless Steel

LDX2101 is a Lean Duplex Stainless Steel manufactured exclusively by Outokumpu Stainless

A guide on material safety covering stainless steels

Information on Mild Steel Metric Tube Loose Backing 'Plate' Flanges. Epoxy Coated 206N (Green) Drilled according to BS4504 PN10/PN16

A guide to the ND / DN range of metric thin-walled tube and fittings in stainless steel

NACE MR 0175/ISO 15156 is a Materials Standard issued by the National Association of Corrosion Engineers.

A guide to NPT High Pressure Threaded Fittings in Stainless Steel

Information about Optisheen wet-polished stainless steel sheet

A guide to pressure ratings for stainless steel tube and pipe

A guide to ROHS for stainless steel products

A guide to NPT High Pressure Socket Weld Fittings in Stainless Steel

A guide to BSP Fitttings in stainless steel

A guide to Butt Weld Fittings in stainless steel

A guide to the care and maintenance of stainless steel products

Information about the corosion resistance of stainless steel

Information and guidance on the fabrication of stainless steel

A guide to stainless steel flanges - ANSI/ASME, BS10, EN1092/BS4504

A guide to therange of hygienic tube and fittings available in stainless steel

An introductory guide to stainless steels

Correct choice of stainless steel grade and finish for use outside in coastal areas

A guide to stainless steel surface finishes including polished finishes

A guide the tubing in stainless steel showing the ranges of tube sizes available and relevant specifications

Type 439 / 441 / Uginox F18T Nb stainless steel