Aluminium Alloy | Tooling Plate
5754 V-Cast Plus
EN573-3
Surface: Precision milled and foiled
V-CAST AlMg3 (EN AW-5754) is a non-ageing wrought alloy with following chemical composition (weight-%, according to EN 573-3). Typical applications are decoratively anodized parts.
Chemical Composition
| Chemical Element | % Present |
|---|---|
| Copper (Cu) | 0.1 max |
| Titanium (Ti) | 0.15 max |
| Zinc (Zn) | 0.2 max |
| Chromium (Cr) | 0.3 max |
| Iron (Fe) | 0.4 max |
| Silicon (Si) | 0.4 max |
| Manganese (Mn) | 0.5 max |
| Magnesium (Mg) | 2.6 - 3.6 |
Generic Physical Properties
| Physical Property | Value |
|---|---|
| Density | 2.66 g/cm³ |
| Electrical Conductivity | 17 - 23 MS/m |
| Heat Capacity | 900 J/kgK |
| Modulus of Elasticity | 70 GPa |
| Thermal Conductivity | 140 - 160 W/m.K |
| Thermal Expansion | 24 x10^-6 /K |
Mechanical Properties
|
- |
|
|---|---|
| Mechanical Property | Value |
| Elongation A | > 12 % |
| Hardness Brinell | > 50 HB |
| Tensile Strength | > 200 MPa |
| Yield Strength | > 80 MPa |
Length and width tolerances of entire plates according to DIN EN 485-3.
*Flatness tolerances are exclusively measured per meter on entire plates using a digital gauge
| Thickness (mm) | Flatness* (mm/m) | Thickness Tolerance (mm) | Roughness depth |
| 6-100 | <= 0.4 | + / - 0.1 | < 0.4 |
Plate Sizes
* Less than 6mm and other sizes possible on request
| Thickness | from 6mm - 100mm * |
| Width | 1520mm |
| Length | 3020mm / 4000mm |