Aluminium Alloy | Commercial Alloy
5052 H32 Triple-Grip Treadplate
Aluminium alloy 5052 in H32 temper has very good corrosion resistance to seawater and marine and industrial atmosphere. It also has very good weldability and good cold formability. It is a medium to high strength alloy with a strength slightly higher than 5251 and a medium to high fatigue strength.
This treadplate is supplied to BS EN 1386.
Alloy 5052-H32 TripleGrip treadplate has a range of useful properties:
~ Decorative Finish
~ Hard Wearing
~ Non-Slip
~ Corrosion Resistant
~ Low Maintenance
~ Anti-Static
~ Light-weight
Chemical Composition
|
BS EN 573-3:2009 Alloy 5052 |
|
|---|---|
| Chemical Element | % Present |
| Aluminium (Al) | balance |
| Other (Each) | 0.05 max |
| Copper (Cu) | 0.1 max |
| Manganese (Mn) | 0.1 max |
| Zinc (Zn) | 0.1 max |
| Others (Total) | 0.15 max |
| Silicon (Si) | 0.25 max |
| Chromium (Cr) | 0.15 - 0.35 |
| Iron (Fe) | 0.4 max |
| Magnesium (Mg) | 2.2 - 2.8 |
Alloy Designations
Alloy 5052 also corresponds to the following standard designations and specifications but may not be a direct equivalent:
Al 2.5Mg Cr
Al Mg2,5
Temper Types
- H32
Supplied Forms
- Treadplate/Patterened Sheet
Generic Physical Properties
| Physical Property | Value |
|---|---|
| Density | 2.68 g/cm³ |
| Melting Point | 605 °C |
| Thermal Expansion | 23.7 x10^-6 /K |
| Modulus of Elasticity | 70 GPa |
| Thermal Conductivity | 138 W/m.K |
| Electrical Resistivity | 0.0495 x10^-6 Ω .m |
Mechanical Properties
|
BS EN 573-3:2009 Sheet - 1.5mm to 3mm |
|
|---|---|
| Mechanical Property | Value |
| Proof Stress | 130 Min MPa |
| Tensile Strength | 210 - 260 MPa |
| Hardness Brinell | 61 HB |
Size Range
| Size (mm) | Weight per plate (kg) |
| 2500 x 1250 x 1.5 | 13.9 |
| 2500 x 1250 x 2.0 | 18.1 |
| 2500 x 1250 x 3.0 | 26.6 |
Fabrication
Workability - Cold: Good
Machinability: Acceptable
Weldability - Gas: Good
Weldability - Arc: Very Good
Weldability - Resistance: Very Good
Brazability: Acceptable
Soldeability: Not Recommended
Applications
Alloy 5052-H32 Aalco TripleGrip Treadplate is typically used in a wide range of structural and decorative applications, including:
~ Factory Flooring
~ Flooring and vertical panels in the road transport industry – commercial vehicles, buses, coaches, fire engines, military & utility vehicles, etc.
~ Railway rolling stock
~ Stations and freight terminals for railways, underground railways, ports, cargo handling, etc.
~ Materials handling equipment such as conveyors, airport baggage carousels,
~ Indoor and outdoor walkways, steps, stairways, gantries, bridges, cranes,
~ Decorative indoor and outdoor panels for architectural / building & construction use
~ Horse boxes, trailers, boat trailers, etc.
Compared with 5-Bar Treadplate in Alloy 5754-H111
Alloy 5754 has slightly higher corrosion resistance and better weldability than alloy 5052. The two alloys have similar physical and mechanical properties and fabrication performance.
Tensile Strength and Shear Strength are very similar whilst Proof Strength of 5754 is only 100 as against 175 for TripleGrip.